The Deal

$39 for one portable electric vehicle air compressor pump

$69 for two portable electric vehicle air compressor pumps

Highlights

• Five major functions: rapid inflation, precise pressure measurement, safety hammer, distress signal, lighting
• 19-cylinder high-power fast inflation
• Powerful metal motor
• Built-in power plug fuse for added safety
• Portable size

Features

• Material: metal, ABS
• Colour: black
• Power source: car cigarette lighter plug
• Power cord: 3m
• Current: 8A
• Voltage: 12V
• Power: 100W
• Pressure: 3kg
• Pressure flow: 25L/min
• Dimensions: 15cm x 8cm x 13cm

Using Tips

To Inflate

• Connect the power
• Connect the nozzle to the tyre
• Start the air pump switch
• The meter will increase with the saturation of the tire pressure
• When the value reaches the appropriate air pressure (typically the car pressure is 2.5kg/cm2), turn off the switch, take off the gas nozzle, and complete the inflation

To Check the Tyre Pressure

• Directly align the pressure measuring head to the valve
• Press hard and the pressure gauge will show the air pressure of the automobile tire

As Lighting/SOS Signal

• Connect the power
• Press the light switch, the LED lights up
• Press the light switch again to turn on the SOS signal

As a Hammer

• Remove the safety helmet at the head of the pump
• Directly hit the glass in emergencies

Precautions

• Cannot be used to inflate tires of large and overweight vehicles, such as trucks, large trucks and more
• The engine of the car should be activated when in use to increase the power without losing the battery power of the car
• Limited to use DC (DC 12V 12-24A) power supply, 220V domestic power is not available, to use it with a mains power source, a transformer to DC12V would be required
• When the tire is inflated, it is best to take a break every 10 minutes to extend the life of the motor
• Suitable for inflating typical car tyres, the normal pressure of 2.5kg/cm2 can be achieved in about 5-7 minutes (larger tyres may take longer)
• When the meter pointer starts to rise rapidly (about 490KPA in about two or three seconds), the air is blocked and the air does not enter the tyre. In such a case, the power switch must be turned off, the gas nozzle must be removed, and the operation must be restarted again or it may damage the meter and motor
• Do not leave the inflator when using it, pay attention to tire pressure at any time, do not inflate when too saturated